Midstream Oil Gas Recruitment
Crude oil extracted has to be refined into various products like Petrol, Diesel, Kerosene, LPG, etc. The refining of oil is done Midstream in various refineries using different processes. The various products extracted from crude oil after the refining process are as follows:

Using the above mentioned manpower, Crude oil in the refineries is processed to obtain the following products of daily use :
- Petroleum gas - Petroleum gas is used for heating, cooking and making plastics.
- Naphtha -It is the intermediate that will be further processed to make gasoline.
- Gasoline - Used as fuel in most motor vehicles.
- Kerosene - Fuel for jet engines and tractors; starting material for making other products Gas oil or
- Diesel distillate - Used for diesel fuel and heating oil; starting material for making other products
- Lubricating oil - Used for motor oil, grease, other lubricants
- Heavy gas or Fuel oil - Used for industrial fuel; starting material for making other products
- Residuals (coke, asphalt, tar, waxes)- starting material for making other products.
Fractional Distillation
Petroleum Engineers and factory technicians are involved in separating crude oil into various components (called fractions), using the differences in boiling temperature. This process is called fractional distillation.
Chemical Processing
Chemical Engineers use newer techniques of Chemical processing on some of the fractions to make others, in a process called conversion. Chemical processing, for example, can break longer chains into shorter ones. This allows a refinery to turn diesel fuel into gasoline depending on the demand for gasoline.
Refineries must treat the fractions to remove impurities. Refineries combine the various fractions (processed, unprocessed) into mixtures to make desired products. For example, different mixtures of chains can create gasoline with different octane ratings
The products are stored and managed on-site by the Facilities Engineer Lead , Reservoir Engineer and other workmen until they can be delivered to various markets such as gas stations, airports and chemical plants. In addition to making the oil-based products, refineries must also treat the wastes involved in the processes to minimize air and water pollution taken care of by the Pollution control engineer, waste management professionals and health and safety engineers.

Refineries Process
The process of producing final petroleum products from crude oil is carried out in refineries.
Petrochemicals
Petrochemicals are a group of chemicals derived from the processing of petroleum gas. They are manufactured from the gaseous hydrocarbons produced during the cracking processes of manufacturing Gasoline.
Environment, Health and Safety
The control of pollution and safeguard of lives and property from damage and losses comes under the purview of Environment and safety.
|
|
|||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
Expandable Systems |
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
Health & Safety Engineer) |
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
Why recruit through us?
- We selectively choose the candidates to fit the needs of our valued customers and create long-term relationships without compromising on our core values.
- Rigorous validation process to verify information provided by candidates
- Intensive pre-selection scanning to measure competence and aptitude of candidates.
